Electrical Services in Seattle, WA

Local Electrician Expertise

Ballard, Capitol Hill, Fremont, and neighborhoods across Seattle, WA rely on professional electrical installation service to power homes and businesses safely. Modern systems demand licensed expertise. We handle panel upgrades, EV charger installation, rewiring, and troubleshooting work that keeps power flowing and properties up to Seattle's building codes.

This page covers electrical panel upgrades, service upgrades, hot tub circuit installation, EV charger setup, home rewiring, and electrical troubleshooting across King County and Snohomish County. Seattle enforces strict electrical codes, and permits are required for nearly all electrical work—whether it's a new circuit or a major system overhaul.

How We Work

Our process is straightforward: assess, plan, execute, inspect, and sign off. You stay informed every step of the way.

What's Involved

Electrical work in Seattle follows a structured workflow. We size your project, determine if permits are needed, schedule inspections, and coordinate with Seattle's Department of Construction & Inspections (SDCI). Most projects require a cover inspection, service inspection, and final inspection before completion.

Assess & Plan

We evaluate your electrical needs, measure load capacity, and confirm permit requirements. Seattle homes sometimes have older panels; we check code compliance.

Permit & Schedule

We pull permits through SDCI and coordinate inspection schedules. Work cannot start until permits are in place in Seattle.

Install & Wire

We run conduit, install panels, pull wire, and connect equipment per code. Safety and neatness are non-negotiable on every job.

Inspect & Verify

SDCI inspectors verify each phase (cover, service, final). We correct any deficiencies immediately to keep projects moving.

Power On & Document

Final approval granted, power restored, and permits filed. You receive documentation for your records and future reference.

You'll always know what's happening next—and when.

Our Services

We specialize in residential and commercial electrical work across Seattle and surrounding areas.

Electrical Panel Upgrades

Old 100-amp or 150-amp panels can't support modern homes. We upgrade to 200-amp service, adding circuits and capacity for appliances, heating, and future needs. Homes in Wallingford and West Seattle often need this work during remodels or when adding electric heat.

Full panel replacement with new breakers
Coordination with Seattle City Light for service upgrade
All SDCI permits and inspections included

Panel upgrade installation in Capitol Hill home, adding capacity for modern loads.

240V Level 2 EV charger mounted in Fremont garage with dedicated circuit.

EV Charger Installation

Installing a 240V Level 2 charger at home cuts charging from 10+ hours to 4–6 hours. We run new circuits from the panel, mount the charger, and ensure it meets Seattle's electrical code. Perfect for properties with garage space.

Dedicated 40–60 amp circuit installation
Mount charger indoors or outdoors
SDCI permit and final inspection

Home Rewiring

Older homes in Ballard and Queen Anne often have cloth-insulated or aluminum wiring that poses fire risk. We replace with modern copper wire, add GFCI protection in bathrooms and kitchens, and bring your system up to code.

Full or partial rewiring with copper wire
GFCI and AFCI outlet protection added
Code-compliant grounding and bonding

New copper wiring installation in historic Seattle home, meeting modern safety standards.

Dedicated 50-amp circuit for hot tub in Beacon Hill backyard, with weatherproof disconnect.

Hot Tub Circuit Installation

Hot tubs draw 40–60 amps and need a dedicated circuit with a weatherproof disconnect switch. Seattle's wet climate requires proper GFCI protection. We handle the full circuit run from panel to tub location.

50-amp dedicated circuit with breaker
Weatherproof disconnect switch and GFCI
Proper grounding for safety in wet areas

Electrical Remodeling

Kitchen and bathroom remodels require new circuits, outlet upgrades, and code compliance. Seattle requires GFCI protection in kitchens and wet areas. We coordinate with your general contractor to route wire and install per plan.

New circuits for kitchen appliances and countertop outlets
Bathroom ventilation fan and lighting circuits
GFCI and AFCI protection per Seattle code

Kitchen remodel with dedicated 240V circuit for range and GFCI-protected countertop outlets.

Diagnostic work on residential panel and wiring in Eastlake home, identifying outdated components.

Electrical Troubleshooting

Tripping breakers, dead outlets, or flickering lights signal real problems. We diagnose overloads, damaged wiring, faulty appliance connections, and code violations, then recommend repairs or upgrades to fix the root cause.

Circuit tracing and load analysis
Outlet and switch testing
Code violation identification and repair recommendations

Why Local Expertise Matters

Seattle's electrical code is strict, and permit systems can be complex. Local knowledge saves money and prevents delays.

Seattle Code Compliance

We know the 2020 Seattle Electrical Code and SDCI's inspection requirements. Permits pull quickly, and inspectors approve on first visit—no rework.

Older Homes, Modern Systems

Many Seattle homes have cloth wiring or insufficient capacity. We diagnose aging systems and plan safe, code-compliant upgrades.

Permit & Inspection Coordination

We handle all permits with SDCI and schedule inspections through the city. No guesswork on what's required.

Professional, licensed work protects your investment and satisfies building inspectors.

500+ residential and commercial electrical projects completed in King County and Snohomish County. Licensed electricians trained to current NEC and Seattle standards.

Coverage Area

We serve Seattle neighborhoods and surrounding King County and Snohomish County communities.

Seattle Neighborhoods

We work regularly in Ballard, Capitol Hill, Fremont, Wallingford, Queen Anne, Beacon Hill, West Seattle, Eastlake, and all central and south Seattle areas. Most jobs are in single-family homes, but we also handle small multifamily projects.

Beyond Seattle

Licensed to work throughout King County and Snohomish County. We handle jobs in Shoreline, Renton, Federal Way, Edmonds, and Bothell, respecting each jurisdiction's local codes and permit requirements.

Getting Here

We dispatch work crews by service area to keep response times short and travel efficient. Parking in Seattle neighborhoods is tight, so we arrive early and communicate when we need to reserve street space for materials or vehicle access.

Based in the Seattle metro area with quick response across King and Snohomish Counties
Familiar with street parking, alley access, and HOA rules in Seattle neighborhoods
Direct contact for project coordination and inspector scheduling

Frequently Asked Questions

Do I need a permit for electrical work in Seattle?

Yes, most electrical work requires a permit from SDCI. This includes new circuits, panel upgrades, wiring changes, EV chargers, and hot tub installations. Some minor replacements (like a light fixture with no wiring changes) may not need a permit, but it's best to check with a licensed electrician. Unpermitted work can cause problems during a home sale.

What does SDCI inspection involve?

Most residential electrical permits require three inspections: a cover inspection (before drywall), a service inspection (when power is connected), and a final inspection (when work is complete). The inspector checks that work meets the 2020 Seattle Electrical Code and 2020 NEC standards.

What's required for an EV charger in Seattle?

A Level 2 home charger (240V) typically needs a dedicated 40–60 amp circuit run from your main panel. Seattle requires a permit and inspection. Some newer panels have room for an extra breaker; older panels may need an upgrade first. We assess your panel and run all necessary wire and conduit.

Why do old Seattle homes trip breakers or have dead outlets?

Many homes built before 1980 have 100-amp or 150-amp service. Today's homes draw more power for appliances, heating, and electronics. Overloaded circuits trip breakers or develop loose connections that cause dead outlets. A panel upgrade or load redistribution often solves the problem.

Is cloth or aluminum wiring dangerous?

Yes. Cloth-insulated wiring (common in 1930s–1960s homes) can deteriorate and create fire hazards. Aluminum branch wiring (1970s) corrodes at connection points, causing overheating. We replace both with modern copper wire and GFCI protection to bring your system up to code and eliminate risk.

Can I do my own electrical work in Seattle?

Property owners can apply for permits for their own owner-occupied single-family home only if they do the work themselves. No permit exception exists for rental properties or commercial buildings. Work must still pass SDCI inspection. Licensed electricians are highly recommended for safety and code compliance.

DISCOVER WHAT OUR CUSTOMERS HAVE TO SAY ABOUT US

REVIEWS

proudly serving these areas

Marysville, WA
Arlington, WA
Snohomish, WA
Snohomish County, WA
Bothell, WA
Everett, WA
Lynnwood, WA
Shoreline, WA

view all service areas